Food processing plants are one of the harshest environments you can put a computer in. High-pressure washdowns happen daily. Cleaning chemicals are aggressive. Operators wear gloves. Downtime is never an option. That’s exactly the environment the KLD-1061B was built for.
Constructed entirely from 304 stainless steel, the KLD-1061B doesn’t just resist moisture — it holds up against the aggressive disinfectants and acidic cleaning agents that degrade standard enclosures within months. In meat processing facilities, seafood plants, and dairy operations, hygiene protocols are non-negotiable, and the hardware has to keep up.
The KLD-1061B runs an Intel® Celeron® J1900 quad-core processor in a fully fanless configuration. No fan means no air intake, no filter to clog, and one less mechanical failure point in a wet environment.
| Processor | Intel® Celeron® J1900 — quad-core, four-thread |
| Cooling | Fully fanless — sealed passive thermal design |
| Storage | Solid-state drive — no moving parts, vibration-resistant |
| Connectivity | Wi-Fi + wired LAN — real-time production data transfer |
| Operating Temp | −10 to 60°C — stable across cold rooms and cook lines |
Solid-state storage combined with fanless design eliminates the two most common hardware failure modes in high-humidity food factory environments: mechanical disk failure and fan-borne contamination.
The five-wire resistive touchscreen is a deliberate design choice. Unlike capacitive screens that require bare fingertips, resistive touch responds accurately whether operators are wearing latex gloves, nitrile gloves, or light work gloves.
In practice, this means fewer input errors and less operational friction during high-volume production shifts — where stopping to remove gloves at a terminal is not a realistic option.
The interfaces are often the weakest point in wet-environment hardware. The KLD-1061B addresses this with all-stainless steel aviation plug connectors compliant with GJB599A-93 (MIL-DTL-38999K) — the connector standard used in aerospace and defense applications.
Every port stays sealed when not in use, with no exposed contacts to corrode or trap food residue. The same connectors that survive aircraft vibration and saltwater environments have no trouble with a meat plant’s daily sanitization cycle.
The KLD-1061B has been deployed across meat processing plants, seafood facilities, and dairy companies worldwide. Its stability and reliability have been recognized consistently across these deployments.
